Acorn ADF 32, Руководство по эксплуатации

Страница: 4 / 8

Positioning/Ventilation
In order to prevent overheating, ensure
that the ventilation openings in the monitor
are not covered.
The monitor should not be placed near a
source of heat nor on a soft surface since
this would block the ventilation slots on
the bottom.
Movable support
You can tilt the monitor into a convenient
position with regard to the computer by
using the movable support.
Connection to the mains
You can connect your monitor to a mains
voltage of between 220 and 240 V. If the
mains voltage in your home is different
from this, consult your dealer.
Connections to a computer
Your monitor is equipped with connectors
for input of RGB video and audio signals.
Each connector is marked with its
function.
Connections (rear panel)
AUDIO IN (Phono type) .
For connection of a signal source with a
s o u n d ( a u d i o ) s i g n a l o u t p u t . Y o u r
computer may not have an audio output to
make use of this facility.
TTL RGB input (8 pin DIN type 270°)
For connection of a computer with a TTL
RGB output with separated sychronisation (
TTL level).
RGB linear + Audio input (
Euroconnector type)
For connection of a computer or certain
other type of video equipment with a linear
RGB output on the Euroconnector.
Remark:
If you connect both RGB inputs
simultaneously the TTL RGB input
automatically has priority over the linear
RGB input.
After switching off or removing the
connection cable from the TTL source,
RGB linear will be looped in.
2