Acorn AC-309, Инструкция по эксплуатации, Страница: 8 / 12

7
WIRING OF CEILING FAN:
INSTALLATION OF CANOPY:
fig 8
1) Total four colors of wires
connected from the top of the
motor:
* Red – Live wire for fan
* Blue – Live wire for lightkit
* Green – Ground wire
* White – Neutral wire
2. Connect fan wires to ceiling wires: White to Neutra, Red to Live, Green to
Ground. If you opt for lightkit then connect the Blue to Live wire. If not,
cap the Blue wire off with a connector.
3. After connecting the wires, spread them apart so that the Green & White
wires are on one side and the Red wire is on the other side (fig 8).
4. Earth wire is longer than safety cord by 60mm and more. When the
failure of the suspension system occurs, the current carrying conductor
taut before the earthling conductor and the body of the fan assembly is
still effectively earthed.
5. Place the remote receiver inside the canopy (refer to the remote control
manual for remote receiver installation).
fig 9
1) After wiring done, lift up the
canopy towards the ceiling
and tighten with screw firmly
(fig 9).