Power Your Green Life!
www.ACOPower.com
KIT-HYS200MB
4120 Valley Blvd Walnut, CA 91789, USA
+1-626-737 1140
What are you going to use it for
1. Charge solar generators
1.1. Charge 12V Solar Generator with built-in Charge Controller
Step 1: understand your solar generator and prepare the MC4 adapter for your solar generator
Step 2: Disconnect MC4 Connectors and let it to be a solar panel with MC4 connectors
Step 3: Use your MC4 Adapter to charge your solar generator
2. Charge your 12 Volt battery
The solar panel kit is designed to charge a large range of batteries including Sealed, Flooded, GEL, AGM, Lithium,
lead-acid battery and other deep cycle battery. The batteries are used as car battery, RV battery, boat battery and
emergency back-up battery.
Step 1: understand your battery: battery type, capacity and voltage
Step 2: check the charge controller’s set up. We have defaulted the setting of the charge controller is for SEALED.
(AGM is also included in SEALED type.) If your battery’s type is different, please set your battery type with the
charge controller following the instructions below under “4.4 Battery type”.
Specifications
200w solar panel
Type
Module Size
N.W
Specification
Max-
Power
Max-
Power
Voltage
Max-power
Current
Open-
Circuit
Voltage
Short-
circuit
Current
Module
mm
Kg
W
V
A
V
A
2*100W
0
1005*670*35
22.12
2*100
17.6
11.43
21.1
12.34
(39.6*26.4*1.4 in) (48.8 lb)
