Heat pumps AIR / WATER
Operation manual
28
3.2.11
Time plans
Clicking
time plans
link in the website menu displays tables in which it is possible to enter the
time periods and temperatures applicable in these time periods in the rooms, domestic hot
water temperature and service water temperature.
Below the dark blue bar there is a grey bar with switching individual schedules. The active plan
is coloured with a darker grey stripe. Click the mouse to switch to the selected schedule –
schedule for heating circuits (
Circuit1, Circuit2
), schedule for domestic hot water temperature,
which is the temperature of the water returning from the system, or the temperature at the
bottom of the accumulation tank (
Domestic hot water
) or schedule for hot water temperature
(
service water
).
3.2.11.1
Circuit 1, Circuit 2, Domestic hot water
For each day it is possible to enter 2 time periods in which the room temperature (domestic hot
water temperature at ST) will be controlled to the value entered in this table. At the top of the
table it is possible to choose whether the heat pump will follow the schedule. If unchecked, the
device ignores the set times and independently of the time heats the object to the set
temperature value entered on the main page. Holiday date overrides this option, it is always
valid.
At the bottom of the page it is possible to enter the vacation date and temperature to be
maintained in the room during the vacation. It is also possible to enter the service water
temperature in the same period. The current vacation will be displayed at the top of the main
page. If the heating system consists of several independent heating circuits with separate
adjustment, each circuit follows its own schedule. Switching between plans is possible by
mouse clicking on the texts Circuit1/Circuit2 at the top of the schedule table.
