Indoor temperature
SMART button is ineffective in SUPER mode.
Target temperature
21
℃
or below
22
℃
26
℃
Over 26
℃
21
℃
-23
℃
23
℃
-26
℃
Your feeling
What you can do in SMART mode
button
adjustment procedure
Operation mode
HEATING
FAN ONLY
DRY
Room temperature
decrease 2
℃
after
operate for 3 minutes
COOLING
Press the SMART button, the unit enters SMART mode(fuzzy logic operation) directly regardless of
the unit is on or off. In this mode, temperature and fan speed are automatically set based on the
actual room temperature.
Uncomfortable
because of
unsuitable air
flow volume.
Uncomfortable
because of
unsuitable flow
direction.
Indoor fan speed alternates among
High, Medium and Low each time this
button is pressed.
Press it once, the vertical adjustment
louver swings to change vertical airflow
direction. Press it again, swings stops.
For horizontal airflow direction, please
refer to the previous page for details.
Operation mode and temperature are determined by indoor temperature
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, For the on/off, you can choose from -2 to 2, for the inverter you can choose
from -7 to 7. if you still feel uncomfortable
Operation instructions
5
SMART mode
Heat pump models
Cooling only models
CLOCK button
You can adjust the real time by pressing CLOCK button, then
using and buttons to get the correct time, press
CLOCK button again the real time is set.
Indoor temperature
Target temperature
23
℃
or below
26
℃
Over 26
℃
23
℃
-26
℃
Operation mode
FAN ONLY
DRY
Room temperature
decrease 2
℃
after
operate for 3 minutes
COOLING
ON/OFF
MODE
FAN
SWING
SLEEP
SUPER
SMART
IFEEL
DIMMER
TIMER ON
TIMER OFF
CLOCK
ON
OFF
FAN
SWING
Press MODE button cancel SMATR mode.
