NO.6
R
System connection diagram
L
* Do not leave objects generating magnetism near the speakers.
SPEAKER TERMINALS
Connect the satellite and center speaker to the output terminals as
shown in the figure.
Connect the 3.5" stereo cable to the input of the subwoofer,Connect the
3.5 stereo input jack into output of the audio sources,such as MP3,MP4,
walkman,computer etc.
NO.7
In use please pay attention to the following items:
*if the remote control cannot function, it is because the battery of
remote control has been used up. thank you.
1. /SOURCE
4. 5.VOL+/- 6. /SCAN
2.LED 3.
4
5
6
1.Switch on the unit, it will be in standby state with LED display showing
" --- ".Press the key “ ” , it's turned into Aux input mode with
display showing "BT 18".("BT" means BT mode,"18 " means the present
volume is 18dB,volume range is 0~30dB). Long press the key 3~5 seconds,
the unit will be back to standby state.
2.Press the “SOURCE” key to choose the input modes by the cycle order
of “AUX-DVD-USB/SD-FM”. Meanwhile the LED display indicates “Au18”.
“Du18”. “Ud18”. “87.5”.
3. In FM mode, short press the key “ ”, “ ” to search channels step by
step(each time 0.1 MHz). Long press the key 3~5 seconds, the unit will
do automatic cycle search and play the channel after getting the signal.
4. In USB mode, press the key “ ”,“ ” to skip to previous or next song.
5. In USB mode, press “ ” you can pause and play control ,
In FM mode press “ ”.
Automatic search and storage of radio
channels
6. Knob operation: turn right/left to increase/decrease the volume based
on the key volume control.
7
.
Rotary volume knob to increase or decrease the volume. The current
channel won't change when operahing it; the volume level will increase/
decrease from 00 to 30 as user operating it.
NO.4
Front panel
/SCAN
/SCAN
1
2
3
/SOURCE
Rear
panel
(1)
(2)
(3)
(5)
(4)
1. ANTENNA
2. AUX Input
3. DVD Input
4. Output R/L
Connect the satellite speakers.
5. AC IN : AC Power cord
MIC
side panel
NO.5