7
Basic Operations
Remark:
1. The keys operation refers to remote control
operation, for panel control keys operation
please refer to ''
Panel Control Keys
'' operation
explanation.
2. The [
u
] key means direction key and the
[
u
]
(
play) key means play function key
3. Menu Operation Instruction in this manual is
explained according to TV mode. The operations
in other modes are similar to the one in TV
mode, and users can take it as reference.
4. Before power-on platform, please make sure that
the power supply is stable.
Turning on/Standby
Before power-on platform, please make sure that
the power supply is stable.
Plug power cord into the electrical socket, then
press [ ] key to turn on the TV. The first time you turn
on the TV, the "Welcome" menu will be displayed on
the screen. Press [
p
]/[
q
]
key to select OSD language
which you wish and press [
u
] key to next step. The
Data collection and firmware updates notice
will be
displayed on the screen, you can accept it or decline it
according to your situation. Then you need to set the
country, timezone and TV mode. Finally, follow the
prompts to operate the network configuration and auto
search, you can also choose to skip it temporarily.
Please press [ ] key if you want to return to the
previous page during the process.
In power on state, press [ ] key to switch to
standby mode.
★
Special Tips:
This device adopts energy saving
technology. If there is no signal input in power on
state, it will enter standby state automatically in ten
minutes; The device will enter standby state
automatically at specified sleep time;
Signal source selection
You can connect various devices to the TV set and
view high quality images. If the video device has
HDMI, AV, PC and other video output ports, you can
select one of them and connect to corresponding input
ports of the TV set. After connected, turn on the device
and press [
SOURCE
] key, then menu of signal source
Precautions for using the remote control
●
The remote control should be pointed at the
remote control sensor during operation. An object
placed between the remote control and the remote
control sensor may impede normal operation.
●
The remote control should be prevented from
strenuous vibration. Besides, please do not set or
place the remote control under direct sunshine, as
heating power may result in deformation of the remote
control.
●
Remote control failure may occur when the
remote control sensor of the main unit is under direct
sunshine or strong lighting; in this case, please
change the angle of lighting or this TV set, or operate
the remote control near the remote control sensor.
●
Low battery will influence the remote control
distance, in which case, the battery should be replaced
with a new one. If the remote control is going to be idle
for a long time or the battery runs out, please take the
battery out to prevent the remote control from being
corroded by battery leakage which may result in
damage and failure of the remote control.
●
Please do not use batteries of different types. It
is not allowed to use old and new batteries together;
the batteries should be replaced in pair.
●
Please do not throw the batteries into fire or
charge or decompose the batteries; do not charge,
short-circuit, disassemble/assemble, heat or burn used
batteries. Please dispose the waste batteries pursuant
to relevant regulations on environmental protection.
55EU
英文说明书(欧洲
6886
方案
T8E
主板)(Linux)(带Netflix)(三芯)V2.2
