ACOEM Fixturlaser SMC BALANCER, Быстрые советы

Страница: 6 / 14

Fixturlaser SMC Balancer
STEP 0 - Balancing Setup
Define the machine
On the Fixturlaser SMC device go into the
balancing module, create or select a folder
!
Create a new machine
Type on OK to enter into the machine
. Define the number of planes to balance (this manual
shows a 1-plane balancing)
Define the angle unit used to determine visually the
position of the additional weights (angular, number
of blades, number of holes…). Mark the reference
(angle, blade, hole, reflective tape…)
1.
2.
1.
2.
3. 4.
3.
4.