ACOEM ATD- 300 Скачать руководство пользователя страница 5

Страница: 5 / 53

2. SAFETY INSTRUCTION

2.1. General Safety Warnings

WARNING!

Read all safety warnings and all instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or serious injury.

KEEP ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

WARNING! Read all “Lighting protection and Earthing

” (§2.4) before

installation of the device.

Failure to follow the instructions may result in electric shock and serious injury.

2.2. Definitions: Safety Guidelines

The definitions below describe the level of severity for each signal word. Please read this

manual and pay attention to these symbols:

ACOEM

ATD-300/ATD-301

User Manual FW 1.0.0.4 5

Symbol

Description

Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.

Содержание ATD- 300






















































Результаты поиска

Содержание ATD- 300

Отзывы:

Бренды по названию

Популярные бренды

ACOEM ATD- 300, Руководство пользователя

Результаты поиска

Содержание ATD- 300

Отзывы:

Бренды по названию

Популярные бренды