Operating Instructions DMMS_DIGISYS
ACO A
utomation
Co
mponents
6
Foreword
1. Foreword
These operating instructions relay important information regarding safety, operation, maintenance and re-
pair.
Every person involved with utilisation, assembly, start-up, operation and maintenance, must have read and
understood these operating instructions and must retain them within their immediate proximity at all times.
In order that a safe, fault-free and cost-effective operation can be guaranteed, it is absolutely imperative that
the notes on safety, operation and maintenance are strictly adhered to.
The operating instructions are to be supplemented with any existing national guidelines concerning accident-
prevention and environmental protection.
The valid, relative regulations for accident-prevention in the country of utilisation, as well as on the applica-
tion site and the recognised, specialist-technical laws for safe and professional operation are to be noted.
The operating instructions must be available at the application site of the measuring system at all times.
Acknowledgements
We would like to thank the company, WAGO Kontakttechnik GmbH, Minden, for the documentation material
which was so kindly submitted by them.
Registered trademarks
MS- WINDOWS (95/98/ME, NT4, 2000, XP), MS- EXCEL are registered trademarks of the Microsoft Corpo-
ration.
PROFIBUS is a registered trademark of the PROFIBUS User Organisation PNO.
Copyright and company address
© Copyright 2009
ACO AUTOMATION COMPONENTS
Johannes Mergl e.K.
Industriestrasse 2
79793 Wutöschingen-Horheim
Germany
Document identification
Compiled by:
ACO Automation Components
Document version: 1
Original instruction manual
Date of issue:
01. 10. 2009
ACO Automation Components Johannes Mergl e.K. has taken all necessary care to ensure utmost correct-
ness during compilation of these operating instructions. The data specified serves the product description
only and should not be interpreted as guaranteed properties in a legal sense. We refuse to accept liability for
errors, omissions or the data included herein as regards utilisation.
All rights, particularly those rights regarding reproduction and distribution, as well as translations, are re-
served. Under no circumstances should any part of this work be reproduced or stored within an electrical
system, modified or distributed in any way or form (printing, photocopying, microfilm or reprinted) without
expressed written permission from
ACO Automation Components
.
As errors may never be completely ruled out, despite every endeavour on our behalf, we are always appre-
ciative of any comments submitted.
