Acnodes RP1150 Series Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 12

Acnodes RP1150 Series Скачать руководство пользователя страница 11

FAQ – Sun Server

Sun Server are using resolution at 1152 x 900 x 76Hz

Supported resolution mode

640 x 480 x 70/75Hz

800 x 600 x 70/75Hz

1024 x 768 x 70/75Hz

1280 x 1024 x 75Hz (17” LCD)

Note the Max. frequency of 13.3” is 70Hz

You need to change the Sun Server resolution before you connect to LCD
Display

Please do the following procedure to change the resolution setting :
1. as root:

you may find the following comment “/user/sbin/m64config”
2. Type “/user/sbin/m64config – prconf”
to view current resolution
3. Type “/user/sbin/m64config – res 1024x768x70 now”
to change to 1024x768 @ 70MHZ
4. the screen will be rubbish
5. Then type “pkill Xsun”
6. And Type “pkill Xsession” to restart the Xsession
Remember this process need to RESTART the server

Under Common Desktop Environment (CDE)

To change the OpenBoot resolution, you can type the following commend in OK prompt

1. In OK prompt, type “setenv output-device screen:r1024x768x70”
2. Type “printenv” to confirm the resolution has been changed to 1024x768x70Hz
3. Then type “reset” to restart the system
Remember this process need to RESTART the server

Rev. NOV-03

«
...
9
10
11
12
»

Содержание RP1150 Series













Отзывы:

Нет отзывов