Rev. NOV-03
Installation
Before installation, please make sure all of peripherals and computers have been turned off.
1. Connect the Keyboard, VGA, Mouse cables to the computer ports of KVM switch
2. After Powering on computers and finishing the boot-up process, you can start to go KVM
switch.
Note:
Please don t switch the PC port (i.e. Don t press the push button of KVM switch or run hot key)
during the computers are under boot-up process.
Startup
1. Power on the KVM power
2. The channel which have PC connected and it is switch on will have a green LED on that
channel
3. The red LED will indicate the selected channel
4. 7 segments LED will display the bank no.
5. Press channel button to select the channel
6. Key-in the password, default is 00000000
7. Otherwise the keyboard & mouse will be locked
8. If you forget your password, send back to Manufacturer
LED Indication
n
When you change the channel
n
If the PC is turn off or is disconnected
n
The LED will flash otherwise is will lit
Keyboard hot key command
n
Simple key sequence
n
Press Scroll Lock twice within 2sec
n
Follow with a beep sound, going into the hot key mode
n
Need to key in the hot key within 2 sec
n
Go back to Operation System Control state
Содержание KD 81516
Страница 1: ...Rev NOV 03 Model KD 81516 User Manual...
Страница 5: ...Rev NOV 03 LCD Session...
Страница 14: ...Rev NOV 03 KVM Session...
