Acnodes FES93 Series, Руководство пользователя

Страница: 70 / 76

4.6 Power On after Power Failure
This option defines the system’s behavior when DC power is supplied.
Value Description
S0 – Power On System is powered on when DC power is supplied.
S5 – Power Off System is kept in off state when DC power is supplied.
Last State Last system operating state when DC power loss occurred.
When you want to use the AT-mode remote on/off control function, you have to set
this option to “S0 – Power On”. Please refer to
Powering On Using An External
Non-Latched Switch for instructions of using AT-mode remote on/off control function.
To set “Power On after Power Failure” option:
1. Press F2 when the system boots up to enter the BIOS setup utility.
2. Go to [Power] .
3. Set the [Power On after Power Failure] option to the desired setting.
4. Once set, press F10 to save setting and exit.
70