W
H
<
3.6
> Options for Sunlight Readable : Auto Dimming
DA-01
light sensor installed on the display front panel. Users can set auto dimming ON or OFF from OSD
menu. Then display brightness changes according to its ambient brightness. Each change causes 10% in-
crease or decrease on display brightness.
Once the auto dimming is ON, users cannot adjust brightness from OSD menu.
Steps : OSD Menu > Picture > Auto Dimming > ON
[cd/m²]
[v]
1,000
800
600
200
10
[lx]
0
1
100
500
2,000
Light Sensor Operation Range
1
DA-01
Light sensor on
AP
H
model
s
DS-01
is a IP54 dimming knob installed on the bottom right side of the front panel. The display can support
hyper dimming function to adjust brightness from nearly 0% to 100% via the easy-to-use knob. One click on
dimming knob causes 2% increase or decrease on display brightness.
Options : Switch Dimming
DS-01 dimming knob
Dimensions ( W x H ) : 15.5 x 14.2 mm
***
- For this option, front panel and casing dimensions may be changed.
- For
APH
series, if DS-01 dimming knob applied, IP protection will be
downgraded from IP65 to IP54.
P.16
