10
Change Default Modem router Settings
To change your Modem Router’s default settings
(not recommended for
novice users)
:
1.
Open a browser and go to
routerlogin.com
(or
192.168.0.1
alternatively).
2.
Enter the default username and password, which is
admin
and
password
respectively.
ACN recommends keeping the Wi-Fi™ connection secured to block
unauthorised access to your network.
troubleshooting
Quick Tips
If you are unable to get connected to the Internet try these quick tips:
•
Restart the Modem Router. Turn off the power, leave for 5 minutes and
then turn the power and the Modem Router back on. Once the lights
are on (refer to page 5), open your browser to connect to the Internet.
•
Alternatively, isolate the Modem Router. Remove all equipment
connected to the line (including your splitter, telephone and any other
equipment) except your Modem Router. Then restart the Modem
Router and connect it to your computer via an Ethernet Cable - once
the lights are on, try to connect to the Internet.
•
If you are still unable to connect to the Internet remove your Ethernet
cable and attempt to connect wirelessly through Wi-Fi™. (If you have a
successful Wi-Fi™ connection you may have a malfunctioning Ethernet
Cable. In this case contact ACN Technical Support for further assistance.)
If you have tried all of the above, rebooted your computer and still cannot
connect to the Internet, please contact ACN Technical Support on 1300 881 778.
