Software setting and focusing
|
软件设置及对焦
1. Drive installation
驱动安装
1.1 Find the file package "software and driver files" in the memory card delivered
with the machine, and select the software installation package corresponding to
your computer system
在跟随机器配送的内存卡中找到“软件与驱动文件”文件包，选择您电脑系统对应的软件安
1.2 Double click to start the installation software, and then click Install
双击启动安装软件，点击安装即可
Before connecting the laser engraving machine with USB cable, you need to install
ch340 driver for your computer, otherwise the computer cannot recognize the laser
engraving machine
在使用USB线连接激光雕刻机之前，需要为您的电脑安装CH340驱动，否则电脑无法识别激
光雕刻机。
14
