ACME XP-5000SZ F, Руководство пользователя

Страница: 27 / 40

6. 3 pin XLR connectors are more popular than 5 pins XLR.
3 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+)
5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+), Pin4, Pin5 not used.
6.2 Channel Mode Setting
Enter menu mode, select DMX Functions , press the ENTER button to confirm, use the UP/DOWN
button to select Mode , press the ENTER button to confirm, present channel mode will blink on the
display, use the UP/DOWN button to select 21 Channel or 19 Channel Mode, and press the ENTER
button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit
menu mode.
6.3 Address Setting
If you use a universal DMX controller to control the units, you have to set DMX address from 1 to 512
so that the units can receive DMX signal.
Press the MENU button to enter menu mode, select DMX Functions , press the ENTER button to
confirm, use the UP/DOWN button to select DMX Address , press the ENTER button to confirm, the
present address will blink on the display. Use the UP/DOWN button to adjust the address from 1 to
512, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Please refer to the following diagram to set the address for the first 4 units.
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
34 channels 1 35 69 103
40 channels 1
41 81 121
A
26B