3. Main Function
Every time you turn the unit on, it will show the version on the display, press
ENTER
button the
unit will carry out “Set Addr”, equipment will set extemporaneous address on light, after
performing 8 seconds, it will show “Setting Manual” on the display, press
FUNCTION
or
button and “setting Auto” will show on the display. Select the model you desired, press
ENTER
button to enter function which you want. Afterward press
ENTER
, it will automatically power off to
prolong battery life without any change after 30 seconds. If you choose “Setting Manual”, you can
set up address, channel mode, white balance, manual color, and fade speed manually. In “Setting
Auto” mode, you can automatically set up address and channel mode. Press
MENU
button until
“Quit Set” is shown on the display to exit settings.
3.1 Manual Setting
For the Manual Setting you can operate the unit in two ways
：
1.
Choose one operation step, to set up fixture by fixture.
2.
Choose one fixture, to set up the functions step by step.
We will have instructions as below.
3D
