![ACME REFracted RLS 100 Скачать руководство пользователя страница 17](http://html.mh-extra.com/html/acme/refracted-rls-100/refracted-rls-100_user-manual_3046676017.webp)
6.2 Address Setting
If you use a universal DMX controller to control the units, you have to set DMX address from 1 to
512 so that the units can receive DMX signal.
Press the MENU button to enter menu mode, select DMX Settings, press the ENTER button to
confirm, use the UP/DOWN button to select DMX Address, press the ENTER button to confirm, the
present address will blink in the display, use the UP/DOWN button to adjust the address from 001 to
512, press the ENTER button to store. Press the MENU button back to the last menu or let the unit
idle 30 seconds to exit menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units.
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
489 channels
1
490
/
/
10 channels
1
11
21
31
6.3 DMX512 Configuration
Please control the fixture by referring to the configurations below
Attentions:
1. The unit will maintain the last condition until reset if you cut-off the DMX signal.
2. For the channel Function, keep the value for about 3 seconds, then the corresponding function
will take into effect.
489 Channels (Mode 1):
CHANNEL
VALUE
FUNCTION
1
000-255
DIMMER
0%
100%
2
000-255
DIMMER FINE
3
000-007
008-015
016-131
132-139
140-181
182-189
190-231
STROBE
Close
Open
Strobe from Slow to Fast
Open
Slow Open Fast Close
Open
Fast Open Slow Close
16B
Содержание REFracted RLS 100
Страница 1: ......
Страница 6: ...Dimension Weight 500x500x2110mm 31 3kgs 19 7 x19 7 x83 1 in 69lbs 5B ...
Страница 10: ...9B ...
Страница 44: ...Innovation Quality Performance ...