ACME MW-05, Руководство пользователя

Страница: 4 / 28

4
GB
Installation
1. Plug the micro receiver into a USB port of your computer
2. Open the battery door and install battery.
3. Mouse and receiver will start pairing process automatically.
4. After pairing process is done. You can start to use your mouse.
Speed Control
Default DPI is 1000. If you want to slow the DPI, push right and left keys together for over 3 seconds,
then the DPI will automatically change from 1000 to 500. Repeat the process, DPI will return to 1000
DPI.
Store receiver into the mouse
You can store the Micro Receiver by simply put the receiver into the hole of mouse bottom cover.
Trouble Shooting
1. Check Micro receiver connection; try to inserting Micro Receiver to another USB port on your
computer.
2. No connection between the mouse and the Micro Receiver:
• Re-insert the Micro Receiver.
• Remove the battery from the mouse or take a new one.
• Place the battery into the mouse again.
• Reconnect the two devices by using the “Connect“ button which is on the bottom of the
mouse.
Warning:
• Do not disassemble the product or remove any parts.
• Do not put the product into water or any liquid.
• Do not put the product close to heat source, or expose it to high temperature.