Gobo 9
Gobo 7
Gobo 5
Gobo 3
Blackout
Gobo 1
0
DMX512 CONFIGURATION
CHANNEL 1
Gobo 11
Gobo 13
Gobo 14
Gobo 12
Gobo 10
Gobo 2
Gobo 4
Gobo 6
Gobo 8
Open
CHANNEL 2
CHANNEL 3
CHANNEL 5
TILT
PAN
GOBO
SHUTTER
8
16
24
32
40
48
56
64
72
80
88
96
104
112
120
128
255
128
0
White
255
11
22
33
44
55
66
77
88
99
110
121
Green
Orange
Light blue
Amber
Yellow
Purple
Pink
Light green
Blue
Red
Magenta
FLAT
FLAT
BARREL
BARREL
Stopped
Stopped
Stopped
CHANNEL 4
COLOR
0
255
Stopped
Slow
Fast
Slow
Fast
92
10
Gobo+Color
Color
Gobo
174
1
GOBOS
2
4
5
6
7
8
9
10
11
12
13
14
3
•
Start the address
How to address your DMX512 system:
1. Select the channels of DMX controller
2. Dipswitches
Dip
#1
#2
#3
#4
#5
#6
#7
#8
#9
Value
1
2
4
8
16
32
64
128
256
•
Examples:
Channel 01
：
dip / on : #1
（
=1
）
Channel 06
：
dip / on : #2, #3
（
2+4=6
）
Channel 11
：
dip / on : #1, #2,#4
（
1+2+8=11
）
Channel 16
：
dip / on : #5
（
=16
）
A. GENERAL INSTRUCTIONS
Please read the enclosed instructions carefully as they include important points about
safety for the installation, usage and maintenance of the unit.
•
Please keep this booklet with the unit for future consultation. If you sell the unit to
another user, be sure that the new user also receives this instruction booklet thus
giving them the necessary information about the use and general warnings
regarding the unit.
•
Before the initial start-up, please unpack and carefully check all components in
case any damage may have occurred during shipping.
•
Locate a suitable spot for your device where there is good ventilation. Also, make
sure that no ventilating fans or slots are blocked.
•
Protect our environment! Please dispose of the packing boxes properly.
•
The electrical work that is necessary for installation must done by qualified
personnel.
•
Always remember to unplug the unit from the main power before any service is
done. Do not open the unit. There are no serviceable parts inside.
•
It is very important to ground the yellow/green conductor to earth in order to meet
regulations for safety.
•
Check the surrounding area and make sure there are no flammable liquids, water or
metal objects that could enter the fixture. If a foreign object enters the unit,
immediately disconnect the main power. Also, place the fixture in a well-ventilated
room at about 15 cm from the walls.
•
Do not touch any wires during operation, as high voltage is hazardous.
•
In the event of serious operating problems, stop using the unit immediately. Never
try to repair the unit yourself. Repairs carried out by unqualified personnel can lead
to damage or malfunction. Please contact the nearest authorized Technical
Assistance Center. Always use genuine spare parts.
4D