ACME LIGHT PANEL 1000, Руководство пользователя

Страница: 15 / 20

4.2 DMX Controller
If you use a universal DMX controller to control the units, you have to set DMX address from 1 to
512 so that the units can receive DMX signal.
Press the MENU button to enter menu mode, select DMX Setting, press the ENTER button to
confirm, use the UP/DOWN button to select DMX Address, press the ENTER button to confirm, the
present address will blink in the display. Use the UP/DOWN button to adjust the address from 1 to
512, press the ENTER button to store. Press the MENU button back to the last menu or let the unit
idle 30 seconds to exit menu mode.
Please refer to the following diagram to set the address for the first 4 units.
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
2 channels 1 3 5 7
3A channels 1 4 7 10
3B channels 1 4 7 10
4 channels 1 5 9 13
5 channels 1 6 11 16
6 channels 1 7 13 19
4.3 DMX512 Configuration
Please control the fixture by referring to the configurations below
Attentions:
1. The unit will maintain the last condition until reset if you cut-off the DMX signal.
2. For the channel Function, keep the value for about 3 seconds, then the corresponding
function will take into effect.
2 Channel Mode:
CHANNEL VALUE FUNCTIONS
1
000-255
COLOR TEMPERATURE
5600K

3200K
2
000-255
DIMMER
0%  100%
14E