ACME LED-ST2000, Руководство пользователя, Страница: 11 / 16

10 B

Ramp up: Light gradually increases in intensity, and then blacks out.

Ramp down: Light flashes to full intensity, and then gradually fades.

Ramp up-down: Light gradually increases and decreases.

Lightning: The flashes simulate lightning. Duration is not adjustable.

Random flash: Light flashes randomly with variable rate and intensity. Multiple
units flash independently of each other.
Blind effect
The blinder effect, in which the light remains on for an extended period, is
available in all DMX modes. In the 3- and 4-channel modes, the effect is
achieved by the combination of flash duration and rate prevents pauses
between flashes. For example, the blinder effect can be achieved with a flash
duration of 0.25 seconds (250 ms) and a flash rate of 4 flashes per second, or a
flash duration of 0.05 seconds (50 ms) and a flash rate of 20 flashes per
second.
In 3- and 4-channel DMX mode, the intensity of the blinder effect is controllable
on channel 1. LED power is electronically regulated to prevent the LED from
overheating. The intensity falls as power is reduced.
Single Flash
To trigger single flashes, start with the intensity and flash rate at 0 and then set
the intensity on channel 1. When the value of channel 1 is changed, the light
will flash once with the programmed intensity, duration, and effect.
5. Remote Controller BF-04D
This section describes how to operate The LED-ST2000 with optional remote
controls.
Noted: the better is using BF-04D under the 2-channel DMX mode.
How to connect

When connected to the remote control BF-04D, the LED-ST2000 flashes