ACME LED-MTX6S-8W, Руководство пользователя

Страница: 13 / 20

12B
4.3 DMX Controller
By using a universal DMX controller to control the units, you must set a DMX address from 1 to
512.
Press the MENU button up to where is showing on the display. Press the ENTER button
and the display will blink. Use the DOWN / UP buttons to change the DMX512 address. Once the
address has been selected, press and hold the ENTER button until the display stops blinking or it
will store automatically after 7 seconds. To go back to the functions without any changes press the
MENU button again.
Please refer to the following diagram to address your DMX 512 channel for the first 4 units
：