4B
4. Overview
4.1 Front View
DMX On DMX
Input
MASTER On
Master
Mode
SLAVE On
Slave
Mode
1. LED
SOUND
Blinking
Sound activated Mode
2. Display
To show the various menu and selected functions
3. Menu
Press the button to select the programming functions.
4. Enter
Press the button to confirm the selected functions.
5. Up
Press the button to go forward in the selected functions.
6. Down
Press the button to go backward in the selected functions.
7. Hold
Press the button to select color on Red / Orange / Yellow / Green /
Cyan / Blue / Purple / Magenta / White
8. Chase
Press the button to select 12 chases patterns form chase slider
9. Spectrum mix
Press the button to select 32 spectrum mix colors form spectrum mix
slider
5B
10. Chase slider
To choose chase patterns on Stander chase / Bright chase / Mood
chase / Spectrum random chase / Spectrum sequence chase /
Dynamic chase / Red-Green+ Blue / Green-Red+ Blue / Blue-Red /
Yellow-Blue / Red-Green / Yellow-Green
11. Spectrum mix
slider
Use to control the Color fade and 32 spectrum color mix
12. Speed slider
Use to adjust chase speed within the range of 0.1 to 2.5 seconds.
13. Fade slider
Use to adjust time about fade in or fade out within the range of 2.5 to
12 seconds.
14. Master slider
Use to dimmer /shutter the fixture
15. Sound
Use to receive audio signal for sound activated
16. Full on
All light effect at once
17. Blackout
Blackout the fixture
4.2 Rear View
1. POWER
For AC input and main fuse
2. ON/OFF
Turns On/Off the power
3. MIC
Use to receive external signal to trigger the unit in Sound-Active
mode.
4. DMX LINK
Use 3-pin XLR plug cable to link the units together by DMX 512.
5. FUSE 6.3A
For protection the DC output circuitry.
6. SINGLE OUTPUT
For output DC 24V 300W max.
