ACME LED-MB500, Руководство пользователя

Страница: 15 / 24

4.3 DMX Controller
Using a universal DMX controller to control the units, you have to set DMX address from 1 to 512
channel so that the units can receive DMX signal.
Press the MENU button up to when the DMX Address is showing on the display. Press the ENTER
button and the display will blink. Use the DOWN and UP button to change the DMX512 address.
Once the address has been selected, press and keep the ENTER button pressed up to when the
display stops blinking or storing automatically 7 seconds later. To go back to the functions without
any change press the MENU button again.
Please refer to the following diagram to address your DMX512 channel for the first 4 units.
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
8 channels 1 9 17 25
11 channels 1 12 23 34
14A