LED-CTL6
6
-
4. How To Control The Unit
Three ways to operations:
A. Master/Slave operation
B. Easy controller
C. Universal DMX controller
A. By Master/slave Built-in Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the others to
give a coordinate automatic light show and it’s good for instant shows. In this mode, the
first unit
（
Master
）
must be turn Dip switch 10 on. The first unit is easy to recognize by
nothing in its DMX input jack. The others of chains (Slaves) will have DMX cables
plugged into the DMX input jacks (daisy chain). Please refer to the diagram on setting
the Dip switches.
Slave 1 : dip / on : #1 ( 1 )
Slave 2 : dip / on : #1, #3 ( 1 + 4 =5 )
Slave 3 : dip / on : #1, #4 ( 1 + 8 = 9 )
Slave 4 : dip / on : #1, #3, #4 (1 + 4 + 8 =13)
B. By Easy Controller(CA-8)
The easy remote control is used only in master/slave mode. By connecting to the 1/4”
microphone jack of the first unit, you will find that the remote control on the first unit will
control all the other units for Stand by, Function and Mode
programs.
