10B
4.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when you
want an instant show. You have to set the first unit in master mode
and select
(random show),
(show 1) or
…
or
(show 12) and speed. Its DMX
input jack will have nothing plugged into it, and its master LED will be constantly on and
sound LED will flash to the music. The other units will have to select
(normal) or
(2 light show) mode, Their DMX cables plugged into the DMX input jacks (daisy
chain) and the slave LED lights will be constantly on.
2-light show
In slave mode,
means the unit works as the master unit and
means 2-light
show. In order to create a great light show, you can set
on the second unit to get
contrast movement to each other, even if you have two units only.
4.2. Easy Controller (by CA-8)
The easy remote control is used only in master/slave mode. There is a
terminator for connect the easy controller inside the fixture. By
connecting the cable into DMX IN waterproof cable entry gland to the
CA-8 terminator of the first fixture, you will find that the remote control on
the first fixture will control all the other fixtures for Stand by, Function and
Mode functions.
Blackout Blackout the unit
Function
1. White Strobe
2. Color Strobe
3. Sound White Strobe
4. Sound Color Strobe
Select Show
(Show 1-12)
Select Color
(Color 1-15)
Select Speed
1. Fast
2. Middle
3. Slow
Mode
Sound/Strobe
(LED OFF)
Show
(LED ON)
LED slow blinking LED fast blinking
4.3 DMX Controller
Using universal DMX controller to control the units, you have to set DMX address from 1 to
512 channel so that the units can receive DMX signal.
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
7B
DMX 512 Address Setting
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the DMX 512 address.
Once the address has been selected, press
ENTER
button to setup or automatically exit
menu mode without any change after 10 seconds. Back to the previous functions without
any change press
MENU
button.
Slave Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(slave 1) or
(Slave 2)
mode.
Once select, press the
ENTER
button to setup or automatically exit menu mode
without any change after 10 seconds. To go back to the functions without any change press
the
MENU
button
Show Mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(Random show) or
(show
1) or
(Show 2) or … or
(show 12).
Once select, press
ENTER
button to
setup or automatically exit menu mode without any change after 10 seconds. To go back to
the functions without any change press the
MENU
button
Color mode
Press the
MENU
button up to when the
is shown on the display. Pressing
ENTER
button, Use
DOWN
and
UP
button to select the
(color 1) … or
(color 15).
Once select, press
ENTER
button to setup or automatically exit menu mode without any
change after 10 seconds. To go back to the functions without any change press the
MENU
button
