ACME CamOneTec Surf Mount 360 Degrees, Руководство пользователя

Страница: 9 / 14

turn on video & images
9
Range of use
1
3
B
B C
A
2
[1] – Using the foam rubber pad enables
you to turn plate A, and thus the camera,
by 360°. That way, you can pan while
filming.
[2] – To securely stick the Surf Mount Set
to the board, use plates B and C. These
are stuck to the board by using the 3M
adhesive pads, whereas plate C works
as an additional support for the camera.
[3] – To screw the Surf Mount Set to
a bodyboard, use plates A and B. For
that purpose, drill holes into the board,
matching the ones on the Surf Mount
Set. Afterwards, screw plate B from the
top against plate A from the bottom of
the board to achieve maximum hold. To
do so, you need screws (diameter: 7 mm;
length: thickness of board + 15 mm) and
inherently safe nuts as well as washers
(not included in the set).
360°