ACME AE-610 BEAM, Руководство пользователя

Страница: 4 / 20


Do not operate in dirty or dusty environment; do clean the fixture regularly.

Do not touch any wire during operation as there might be a hazard of electric shock.

Avoid power wires twist other cables.

The minimum distance between light output and the illuminated surface must be more than
12 meters.

Disconnect mains power before fuse/lamp replacement or servicing.

Replace fuse/lamp only with the same type.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

Do not open the unit as there are no user serviceable parts inside.

Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center if
needed.

Disconnect the mains power if the fixture is has not been used for a long time.

Do use the original packing materials before transporting it once again.

To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or
moisture.

Hot lamp explosion hazard. Do not open the unit within 15 minutes after switching off.

Do replace the bulb once it is damaged, deformed or life-expired.

Do not look directly at the light while the bulb is on.

Never touch bulb with bare fingers, as it is very hot after using.

Do not start on the unit without bulb enclosure or when housing is damaged.
3A