ACME ACME-II Series, Руководство пользователя

Страница: 30 / 33

8.0 Problem Solving
8.1 Installation problem:
1. Normally problem with fail start up are due to installation
problem.
2. Double check with all the peripheral cards or items you have
added to the ACMEII.
3. Are all the items seated properly?
4. Are all the cable connected back to its original or correct
position?
5. Are the items you have added compatible?
6. Before you check for these turn the computer off and unplug
the power cord.
7. Check for 1 thru 5 and then re-power up the computer.
8. Remove all items that were added and re-try system power up.
9. If the system starts now, try inserting 1 new item in at a time
and try powering up.
10. Repeat this step until you get the desire result.
8.2 BIOS Beep Code:
The BIOS beep code indicates error in system initialization. The
BIOS of the system board will associate with video and memory
error. Please check your video card is properly seated and your
memory is installed properly.
8.3 System Fails to power up:
1. Check you power connection first.
2. Check the main power switch is in the ON position (I).
3. Press the power button located in front of the machine.
8.4 No display (LCD):
1. Check all the proper power up procedure has been taken.
2. Hook up an external CRT to the VGA port check if video is
present.
3. If video is present on external CRT, check the internal LCD
cable connection.
4. Or check your VGA setting using a CRT to make sure LCD
video is enabled.
5. If there is no video on external, check your system makes sure
everything is seated properly.
6. If everything is seated properly and still no video, call us for
further assistance.
ACMEII User’s Manual
２９