SSM INSTALLATION
Version 1.0
Acme Packet Technical Publications
11
3.
Place the SSM on the Net-Net 4250 SD motherboard by mating the board-to-
board connectors. The SSM lines up directly with four threaded stand-offs so
you can screw it to the chassis in the next step.
Note:
If your 4250 chassis does not have the four stand-offs, stop your
installation and contact customer support for how to proceed.
If the three board-to-board connectors on the motherboard are covered with
protector caps, remove them before installing the SSM.
4.
Screw the SSM to the chassis at four points with the supplied screws.
Postinstallation
After the SSM has been installed in the Net-Net 4250 SD, you can close the chassis
and reinstall it in the equipment rack.
