3. INSTALLATION
⚠
WARNING
*Always turn the Eurorack unit off and unplug the power cord before pluging
the Eurorack power cable.
*When attaching the Eurorack power cable, please be careful not to touch the
terminal part.
Connect to the Eurorack's system power supply (+ 12V) using the supplied
Eurorack power cable.
Connect the 16-pin connector to the Eurorack power connector. Connect the red
mark on the power cable so that it matches the pin on the (- 12 V) side of the
power connector.
Connect the 10 pin connector to the shrouded header on the back of the module.
The header is protected against reverse-plugging.
Red line
To Module
To Power
Connector
GATE
CV
+5V
+12V
GND
GND
GND
-12V
FIG.1
：
Eurorack power cable
5
