3
www.acis.com.vn
CÔNG TY CỔ PHẦN CÔNG NGHỆ ACIS
Địa chỉ: K1- G3 Đường D1, Khu Công Nghệ Cao, P.Tân Phú, Q.9, HCM
Showroom: Biệt Thự 36 đường số 15, P.Hiệp Bình Chánh, Thủ Đức, HCM
Tel & Fax: (84)-08-62 811 225 Hotline: 0902 67 33 89
USER GUIDE MANUAL
(RE and SB6)
1.
SPECIFICATION:
- Size: W-72mm x L-125mm x H- 25mm: Suitable for common rectangle
socket(50 x 100)
- Input: 80 VAC~ 240VAC
- Output: 4 channels x 1000W
– maximum start up current = 10A
- Control channel: 6 channels.
- Connectivity: Wireless, FSK- 868 MHz - 7dbm.
- Wireless range: 100m outdoor.
- Repeater: Mesh
– Grid technology.
- Security: AES-Random 2 w ay.
- Touch sensing: Capacitive
– Auto calibrating sensing.
- Actuator: Relay
- Protection: Fuse 20A- LED indicator.
- LED status indicator: Yes.
- Technology:
Repeater, AES, Random security, Auto ID, Sm art-link, Auto
repair, Auto recovery, Auto Backup, Hold Status, Parallel process, Auto
Scan device.
2.
INSTALLATION:
-
Install pow er w ire to domino terminal follow up input and output order.
-
Screw and fixed device on the w all.
-
Install glass cover then pow er on.
*Note: power off device while installing for safety.
**M ake sure line (L) and neutral (N) order are corrected. No change order.
3.
SET UP DEVICE TYPE:
* Default device type is RE4: 4 channels ON/OFF, 2 script channels. User can change default type to other types such
as RE3, RE2, SB6.
-
Touch and hold button “
5
”, device w ill change mode to setting mode (LED 5 is blinked simultaneously).
-
Touch button “
2
” to enter “device type setup” mode. Logo LED w ill blink 2 times/sec to display device is in setup mode.
-
Touch button “1”/”2”/”3”/”4”. (Compatible LED w ill be ON).
+ Button
“
1
”: SB6 (All channels are script channels).
+ Button
“
2
”: RE2 (“1” and “2” are ON/OFF channels. “3”,”4”,”5”,”6” are script channels).
+ Button
“
3
”: RE3 (“1”, “2” and “3” are ON/OFF channels. ”4”,”5”,”6” are script channels).
+ Button
“
4
”: RE4 (“1”, “2”, “3” and “4” are ON/OFF channels. ”5”,”6” are script channels).
-
Hold button
“
5
” until logo LED blink fast, then device w ill restart and new device type will be changed
-
Tou
ch button “
6
” to exit setup mode.
*When device type is changed, all device settings will be restore to factory values. Need to setup device again.
4.
ADD DEVICE TO SYSTEM :
-
M
ake sure that center controller device (MCE) is in “Add device” mode.
-
Touch and
hold button “
5
”, device w ill change mode to setting mode (LED 5 is blinked simultaneously).
-
Touch button “1” to enter “Learn device” mode.
-
If device learn successful, device w ill exit to run mode.
In case of failure, user can try again by touching button “1”.
-
Touch button “
6
” to exit setup mode.
*If setup is not successful, move center controller device (MCE) to device closer.
5. ON/OFF REPEATER:
-
Touch and hold button “
5
”, device w ill change mode to setting mode (LED 5 is blinked simultaneously).
-
Touch button “
3
” to enter “repeater setup” mode. Logo LED w ill blink 1 times/sec to display device is in setup mode.
-
If “1” LED is ON, repeater function is enable. If “1” is OFF, repeater is OFF. Touch button “1” to change repeater status.
