WARRANTY
The ACI Wireless Series are covered by ACI’s Two (2) Year Limited Warranty, which is located
in the front of ACI’S SENSORS & TRANSMITTERS CATALOG or can be found on ACI’s website:
www.workaci.com.
W.E.E.E. DIRECTIVE
At the end of their useful life the packaging and product should be disposed of via a suitable recycling
centre. Do not dispose of with household waste. Do not burn.
PRODUCT SPECIFICATIONS
Automation Components, Inc.
2305 Pleasant View Road | Middleton, WI 53562
Phone:
1-888-967-5224 |
Website:
workaci.com
Page 4
Version: 8.0
I0000668
PRODUCT SPECIFICATIONS
Supply Voltage:
Supply Current:
Connections:
Wire Size:
Terminal Block Torque Rating:
Operating Temperature Range:
Operating Humidity Range:
Storage Temperature:
Data Protocol:
RF Characteristics:
Transmission Distance:
Transceiver Inputs:
Transceiver Outputs:
Communication Protocol:
Communication Wire:
Termination Resistor:
Baud Rate:
Node ID:
Configuration Software:
System Requirements:
Enclosure Material
Flammability Rating:
24 VAC, 60 Hz (Full wave rectified)
0.5A Nominal
Screw Terminal Blocks
16 AWG (1.31 mm
2
) to 26 AWG (0.129 mm
2
)
0.37 ft-lb (0.5 Nm) Nominal
32 to 122 °F (0 to 50 °C)
30 to 50% RH, non-condensing
-4 to 176 °F (-20 to 80 °C)
IEEE 802, 15.4-2003/2006
900 MHz, Operating Frequency 10 channels between 902 - 928 MHz
Transmitter Power: 11 dBm | Receiver Sensitivity: -11 dBm
200 - 300 ft horizontally depending on building type and construction, and typically one floor
above and below the transceiver vertically
Maximum 100 Analog or Digital Inputs (Max. 50 sensors/modules per transceiver)
50 Analog, 50 Digital points (100 total)
BACnet MS/TP Physical Layer: RS-48S Twisted Pair
Belden 9841 or equivalent
120 Ohm, Dip switch selectable
9600, 19.2K, 38.4K, 57.6K, 76.8K (default), and 115.2K (dip switch selectable)
1 to 127, dip switch selectable
Included; Data registers need to be configured prior to use
- Laptop with Windows 98, XP, Vista, Windows 7, or Windows 10, Ethernet Port, and 10 GB memory
- Direct Connection from PC to MOD9200BNT: RJ45 Crossover Cable (not provided by ACI)
- IP Address of PC must have static address of 192.168.0.2 or above
ABS Plastic
UL94-SVA
