aci eRCM Express, Руководство пользователя

Страница: 46 / 97

mCore Firmware Ver 01.10 Ver 2019-Oct-29 Page 46 of 97
File Identification Method:
At times, multiple eRCM Viewer files will be loaded and ready in the eRCM Express unit.
Examples may include:
•
One model for 1-stage injection, one model for 2-stage injection, and a third model
for 1-stage withdrawal.
•
One model for process gas, and another model for purge gas.
•
One model for unit with no valve spacers, one for all suction valve spacers in, one
for all valve spacers in, and one model for suction valves pulled.
eRCM Viewer files must be specifically identified with a leading digit of “1” through “9”
in their filenames.
•
Warning : Filenames with the same leading digit will lead to confusion. Thus, do
not use filenames like “
1 -0_Unit-12.rvf” and “ 1 -1_Unit-12b.rvf” as both have the
same leading digit “
1
”.
o
NOTE: Do not put spaces and special characters in filenames.
o
NOTE: Length of filenames must be less than or equal to 24 characters.
•
Sample filenames that Can and Cannot be used:
Filenames that Can be Used Filenames that Cannot be Used
1 Unit7-Ariel_2-Stg.rvf Unit7-Ariel 2-Stg.rvf
(has spaces, does not start with digit)
8 Superior_MH6_1-Stage.rvf Superior MH6 Single Stage Unit.rvf
(has spaces, too many characters in filename)
2 .rvf Rev2.rvf
(does not start with digit)
6 _GE-DS_Service1-CNG.rvf 6GEDS_Service1@CNG.rvf
(has invalid character)
•
To select the file to use, simply set the register SetViewerFile
(ACI_Inputs[50]; Reg#
40101)
to the special ID number of that file, from “1” to “9”.
o
Best to wait at least 500 ms after loading a new file before checking it.