aci DSIM-CC, Руководство по установке

Страница: 4 / 16

Page 4 of 16
DSIM-CC & DSIM-CF
Setup Guide Rev E
DSIM
Cable Connector
Status LED
Blue / Orange Status LED
Red/Blue
DSIM Module
Interface
Connector
Mode Decrease Increase
DSIM
Cable Connector
Status LED
Blue / Orange
2. DSIM AGC Module & DSIM Controller Overview
The Digital Station Intelligence Manager (DSIM) product line is the next generation of automatic
gain control modules that provides the outside plant maintenance team with station diagnostic
tools that are unprecedented in the industry. The DSIM AGC module is agile that allows the
program settings to be modified at any time to change the pilot channel number and type from
analog to digital or to change the operational mode into the SPAGC or manual modes of
operation. Having this flexibility to reprogram the DSIM modules is a huge cost savings when
doing system pilot channel modifications over the fixed SPAGC, only the program settings need
to be changed instead of having to change out the entire AGC fixed module.
The DSIM module is programmed to operate as a single pilot AGC. In the SPAGC mode the
DSIM can be programmed to use either an analog or digital pilot signal from channels 52 to 142.
If the pilot channel is lost, the DSIM module will default into a thermal TGC mode and then return
to the single pilot SPAGC mode automatically once the pilot channel has been restored. DSIM
incorporates a bi-colored blue and orange LED that indicates the different operational modes and
settings of the DSIM during setup and operation.
The DSIM controller is used to set the DSIM module
’s pilot channel and to change into the
different operational modes during the amplifier setup. The bi-colored blue and red LED
indicator's blinking patterns will denote the current optional mode setting.
DSIM-CC DSIM-CF DSIM CONTROLLER