aci CLASSIC Fibre, Руководство по эксплуатации

Страница: 31 / 50

Operation
31
6.2 Start
1. Start the laser marking device in accordance with the operating instructions.
2. Activate the power switch for the workstation.
3. Press the Close door button to initialize the workstation.
4. When the workstation is started up for the first time, you need to enter the settings
for the external units in the software.
You will find more detailed information in the software manual.
6.3 Handling
The system is operated via the marking software.
All operating sequences are controlled from the control PC via the laser control interface
of the laser marking device.
All the parameters are exclusively entered on the keyboard of the control computer.
This also applies to operation with the optional rotary module.
NOTICE
Keep to the switching sequence on each start.
NOTICE
Opening the door breaks the laser safety circuit.
NOTICE
Detailed information for using the marking software is contained in the provided soft-
ware manual.