4. Tighten all wiring connections to the proper specification (see below).
Make certain there is good contact with the terminals.
Proper Torque Values for Connection Hardware:
Flooded
Side 70-90 in-lbs
Wing nut 95-105 in-lbs
LPT 95-105 in-lbs
Stud 120-180 in-lbs
LT 100-120 in-lbs
VRLA
Button 90 to 100 in-lbs
LT 100-120 in-lbs
WARNING!
Do not over tighten terminals.
Doing so can result in post breakage, post meltdown, or fire.
CLEANING
Batteries seem to attract dust, dirt, and grime. Keeping them clean will help one
spot trouble signs if they appear and avoid problems associated with grime.
1. Check that all vent caps are tightly in place.
2. Clean the battery top with a cloth or brush and a solution of baking soda and
water.
When cleaning, do not allow any cleaning solution, or other foreign matter to
get inside the battery.
3. Rinse with water and dry with a clean cloth.
4. Clean battery terminals and the inside of cable clamps using a post and clamp
cleaner.
Clean terminals will have a bright metallic shine.
5. Reconnect the clamps to the terminals and thinly coat them with petroleum jelly
(Vaseline) to prevent corrosion.
6. Keep the area around batteries clean and dry.
Copyright © 2012-2015 American Custom Golf Cars, Inc.
Page
57