ACG MOKE NEV 2016 Скачать руководство пользователя страница 14

Страница: 14 / 97

Direction Control Shifter (Forward – Neutral - Reverse)

The “

Direction Control Shifter

” is located at the center of the vehicle ahead of the

Parking Brake Lever.

There are three (3) distinct positions:

Forward (D)

Neutral

(N)

and

Reverse (R)

1.)

FORWARD

(D)

- To operate the vehicle in the forward direction, push the

shifter forward.

2.)

REVERSE

(R)

- To operate the vehicle in the reverse direction, pull the

shifter backward. Your Vehicle has been equipped with a reverse warning
beeper so that when the vehicle is in reverse you will hear a loud beep
signaling that the vehicle is in reverse.

3.)

NEUTRAL (N)

- When the shifter is in the straight up position the vehicle is

Neutral

and will not move when the accelerator pedal is depressed.

(

Fig. 2 - Switch lever shown in

Reverse

position

)

CAUTION!

Always bring the vehicle to a complete stop before changing the
position of the “

Forward-Neutral-Reverse Shifter

”.

Page

Содержание MOKE NEV 2016
































































































Результаты поиска

Содержание MOKE NEV 2016

Отзывы:

ACG MOKE NEV 2016, Руководство пользователя, Страница: 14 / 97

Результаты поиска

Содержание MOKE NEV 2016

Отзывы: