background image

Copyright © 2009-2014 American Custom Golf Cars, Inc. 

 

Page 34 

 

Driving Instructions   

 

 

 

 

 

 

 

 

WARNING! 

No  person  should  be  allowed  to  operate  the  vehicle  without  being 
instructed in the proper use and operation of the vehicle’s controls.  
Each first time driver should be accompanied by an experienced driver 
on a test drive before being allowed to operate the vehicle alone. 

 
1.  Only licensed drivers should be allowed to drive this vehicle. 
 
2.  If renting or loaning the vehicle, make sure the person driving the vehicle 

is familiar with all controls and operating procedures before allowing the 
vehicle to be driven. 

 
3.  No more than two people should be in the vehicle at any time. 
 
4.  Be sure all persons can properly operate the vehicle prior to allowing them 

to drive the vehicle. 

 

5.  Be sure all passengers are capable of securing themselves with provided 

Seat Belts

” before allowing them to ride in the vehicle.  

 
6.  When using the vehicle at night or in low light situations make sure that 

the 

Light Switch

” is in the 

ON

 

or “I” position as this ensures that the 

headlights and tail lights are on to increase visibility and safety. 

 
7.  Be sure that the vehicle is at a complete stop before shifting the  

 

Forward-Neutral-Reverse Switch

”. Failure to do so may cause injury to an  

 unsuspecting passenger and/or damage to the vehicle. 

 

8.  To avoid being struck by the vehicle, do not stand in front or behind the  

 vehicle. 

 

9.  Operate vehicle only from driver seat. 
 
10. To prevent falling from vehicle, remain seated when vehicle is in motion.   

 Driver should always drive vehicle with both hands on steering wheel. 

 
11. To avoid possible serious injury, keep your entire body inside the vehicle       

 when it is in motion. 

 
12.  Never leave children unattended in or near the vehicle. 
 
13.  To prevent the vehicle from overturning, drive slowly straight up and   

 down slopes. Slope exceeding 20% incline should be avoided. 

Содержание 39 Roadster eGC





















































Отзывы:

Похожие инструкции для 39 Roadster eGC