4
2. Operation of remote controller
（
Picture 2
）
（
1
）
ON/OFF
Plug cooler in, and press this button to turn on the air cooler. During the initial use,
the default setting is in the “cool mode”. Press button again to cut the unit off (turns
off fan motor, pump and display).
（
2
）
COOL/FAN
Press this button to select COOL mode (fan and water pump are both on) or FAN mode
(only fan is on). The lights on the control panel will indicate which mode the cooler is
in.
The COOL light will light up, after 30 seconds, fan motor will start working.
（
3
）
Speed
Press this button to adjust the fan speed. Choose from low, medium and high.
（
4
）
Swing
This button makes the louvers oscillate left and right.
（
5
）
Clean
This button is not used or needed on this model.
Picture 2
3. Audible alerts
(1) Each time you press a button on the remote, a buzzer will ring. The operation of
remote control is the same as control panel.
(2) When the water level is below the warning level, the water pump will stop running
and the buzzer will ring, and it will return to work after water is added.
