(Figure 6.)
(Figure 7.)
4
EN
(Figure 5.)
B
B
A
B
Input ：100~240VAC
Output : 19V/4.7A
(Figure 4.)
4.Moving Target:
It is composed of a moving platform and an iTarget, so that the iTarget can move left and right,
and the moving speed can be set to increase the fun and difficulty of the iTarget (Figure 4).
A.Use the RJ45 cable connection to set up the
system.
B.Institutional introduction: stepper motor, belt,
shaft, electronic target, optical interrupter.
C.Dimension: 740mm x 160mm x 91mm
D.Weight: 3.5kg
5.PDU (Power Distribution Unit): (Figure 5)
The PDU is used to connect the power supply and all devices via RJ45 cable.
A.Adaptor Power Din connector, connected to adaptor.
B.Three RJ45 couplers are connected to iTarget, moving
target, scoreboard and controller respectively.
6. Adaptor: (Figure 6)
7.RJ45 network wire: provide 1 m and 5 m cable dual isolation network wire respectively.
The use of non-original wire may lead to system abnormality.
8. Control button: button for starting or stopping the game (Figure 7.)
Содержание iTarget
Страница 1: ......
