Power On/Off:
To power the earbuds on simply press and
hold the middle button on the control toggle for 4 seconds.
There will be an audible tone and a green LED light when
powered on. To power off the earbuds press and hold the
middle button on the control toggle for 4 seconds. You will
hear the power down tone when the earbuds turn off.
Pairing:
To pair the earbuds to your device, make sure the
earbuds are powered on. Once the green light starts to
flash rapidly, go into the device’s Bluetooth settings and
connect to “Acesori A.BUDS”. Once you hear a tone,
your device is successfully paired. If prompted for a
password, enter “0000”.
Playing Music:
To play/pause music, simply press the middle
button on the toggle while the audio is playing on your
device. Pressing the +/- buttons will raise or lower the
volume*. A tone will sound at max & min volumes. Holding
down the +/- buttons will navigate to the next or previous
track. You will hear a tone when the track has changed.
Phone Calls:
To answer or end a call, press the middle
toggle button. Holding down that button for 2 seconds will
refuse the incoming call. Double tapping that button will
redial the last number.
Charging:
To charge the earbuds, plug the included cable
into the MicroUSB port on the underside of the
toggle & the other end of the cable into a USB power
source or a USB port on a computer. The light will turn
green until fully charged. When the green light turns off,
the earbuds are fully charged.
* Use caution when raising the earbuds volume by pressing the +/- buttons. Raising
the volume too high while the earbuds are in your ears may cause discomfort.
Depending on your device, it may appear the earbuds are not at max volume.
When you hear the tone in your earbuds, the volume is at max.
User Guide
ACESORI.COM
