acerpure cozy Series, Руководство пользователя

Страница: 7 / 9

12 13
Disassembling the fan.
This product only requires general external
cleaning and maintenance (as shown in the figure).
Do not wipe with thinner, toluene, acidic
cleansers, lamp oil, alcohol, or chemical
cloth in order to avoid discoloration or
deterioration.
Wipe with a neutral kitchen detergent first,
and the wipe with a clean and soft cloth.
Wipe with a neutral kitchen
detergent first, and the wipe with a
clean and soft cloth.
Please note: After maintenance and
cleaning, wait for the product to fully dry
before connecting power to use again or
storing. If the product needs to be stored,
please place the product back into the
packaging box in the original packaging
order, and place it at a dry location for
safekeeping.
Please note: Please always keep any
connecting parts & motors dry and
dustless to prevent machine from being
damaged from moisture & water.
3. After disassembling the front
grilles, please rotate the blades
lock cover clockwise to remove
the lock cover, and the fan blade
can be disassembled successfully.
4. After disassembling the fan
blades, remove the motor
fixing cover in a
counter-clockwise direction;
the rear fan grille can be
disassembled after
removing the motor fixing
cover.
Maintenance and Disassembly
Maintenance
1. Please unscrew the front
grille.
2. After unscrewing the front
grille, rotate it counter-clock-
wise to disassemble it from
the grille holder.
Screw
Front grille
Blades lock cover
Fan blades
Before disassembling the front grille, make sure that the power of this product has
been disconnected.
2
1
3 4
Before Seeking After-sales Service
If you discovered that the product malfunctioned, please check the following items before contacting customer service.
Please contact customer service if the abnormal problems still could not be solved with the methods above.
Problem Possible cause Solution
Product does not turn on
Is the correct voltage used?
Is power connected to the product properly?
Please insert the power plug into the outlet
properly, and use the correct voltage
Fan blades did not rotate after the
product was turned on
Are there foreign objects stuck in the air
circulator?
Please clean the foreign object from the front
guard of the air circulator.
When the noise is too loud
Is there excessive dust accumulated in the air
circulator?
Please clean the front guard of the air
circulator properly.
Are there foreign objects stuck in the air
circulator?
Please clean the foreign object from the front
guard of the air circulator.
Is the product placed on an uneven floor or
table top?
Place move the product to a flat floor or table
top.
Is the motor shaft of the air circulator fan
blades installed properly?
Please install the motor shaft of the air
circulator fan blades properly.
When the remote control cannot
be operated
Is the battery dead?
Please replace the battery
(Applicable model for the remote control:
CR2032).
Was the remote control pointed towards the
front of the product when used?
Please change the usage angle and point the
signal receiver of the remote control to the
product when in use.
Motor
fixing cover