acerpure aqua WP742-40W, Руководство пользователя

Страница: 5 / 13

04
Display Panel and Function Buttons Introduction-1
｜功能鍵｜
-Filter Replacement Button-
After replacing the filter and turn on the
machine, please press this button for 3
seconds to enter the filter selection mode,
then select the filter you need to replace,
and finally press and hold it
for 3 seconds to complete the filter reset.
-Up and Down Adjustment Buttons-
Touch this button to select to display
water temperature, water volume or TDS
value and you can also adjust water
temperature or volume within a limited
range by this button.
-Normal Temperature Water-
Water temperature can be adjusted to
normal temperature by this button before
water is dispensed.
-Cold Water-
Before dispensing, the water
temperature can be adjusted to cold
water by this button.
-Hot Water-
Before dispensing, the water temperature
can be adjusted to hot water by this button.
-Smart Wash Button-
Use this button to wash and drain the
internal water circuit and water tank.
Short press once: Immediate TDS value
is displayed in the middle of the panel.
Press and hold for three seconds: Smart
wash starts, and the wastewater is
discharged from the outlet after three
minutes. Please make sure to prepare
water containers in advance to receive
water.
-Power Button-
You can start or stop using this product.
*In standby mode, please press and hold
for 2 seconds to turn on the product, and
in power on mode, you can press and hold
for 2 seconds to enter standby mode.
-Direct Water Dispense Button-
You can use this button to take the
water with normal temperature and
default volume. When the water
dispensing exceeds 500ml, the water
dispensing will be stopped automatically.
-Large Cup Volume Water Dispense Button-
You can use this button to dispense water in
a large cup volume (300ml by default).
-Small Cup Volume Water Dispense Button-
You can use this button to dispense water in
a small cup volume (150ml by default).
-Child Lock-
It is designed to prevent burns. When
taking hot water, you need to press the
child lock first, press Hot Water Button
and then Direct Water Dispense Button
to take hot water.
｜Function button｜