background image

v

English

•   

 If an extension cord is used with this product, make sure that the total ampere rating 

of the equipment plugged into the extension cord does not exceed the extension 
cord ampere rating. Also, make sure that the total rating of all products plugged into 
the wall outlet does not exceed the fuse rating.(For monitors with power cords)

•    Do not overloa

d a power outlet, strip or receptacle by plugging in too many devices. 

The overall system load must not exceed 80% of the branch circuit rating. If power 

Always use the power adapter (power cord) kit supplied.

A two-wire grounding plug is supplied for the power cord of the device, which shall 
only be plugged into a grounded power outlet. Make sure that the power outlet is 
properly grounded before plugging in. Do not plug into any ungrounded power outlet. 
Please contact an electrician for details (For monitors with power cords).

strips are used, the load should not exceed 80% of the power strip’s input rating.

•    

•    

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may 

Pull out the power adapter (power cord) of the device in any of the following cases, and 
contact qualified service personnel for maintenance:

expose you to dangerous voltage points or other risks. Refer all servicing to qualified 
service personnel.

•    liquid was spilled into the product

•    Damaged or worn plug of the power adapter (power cord)

•    the product was exposed to rain or water

•    the product has been dropped or the case has been damaged

•    the product exhibits a distinct change in performance, ind

icating a need for service

•    the product does not operate normally after following the 

operating instructions

Note: 

The grounding pin also provides good protection from 

unexpected noise produced by other nearby electrical devices that 
may interfere with the performance of this product.

Warning! The grounding pin is a safety feature. Using a power 

outlet that is not properly grounded may result in electric 

shock and/or injury.

Содержание XV275K






























Отзывы: