9. Step 7 To remove the PSU, you will have to unstick the ribbon cable for the monitor
controls. Gently peel the ribbon cable off. DO NOT untwist the ribbon cable. Simply lift it
up and lift the metal case. Take care – get someone to hold the case whilst you remove the
PSU. NOTE when reassembling the position of the monitor controls.
10. Step 8 – There's a black insulating plastic film below the PSU. Remove this and keep it safe.
The PSU is held in place by 4 screws. The LCD driver is held in place by a single screw.
Remove ALL 5 screws, The whole assembly should now come out.
Peel back ribbon cable. NOTE control position
