Acer X191W Скачать руководство пользователя страница 29

Страница: 29 / 59

The DDC2B is a bi-directional data channel based on the I

C protocol. The host can request EDID information

over the DDC2B channel.

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN

ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

This monitor meets the Green monitor standards as set by the Video Electronics Standards Association(VESA)

and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees

(NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is

no video-input signal present. When there is no video input signal this monitor, following a time-out period, will

automatically switch to an OFF mode. This reduces the monitor’s internal power supply consumption. After the

video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is

similar to a “Screen Saver” feature except the display is completely off. The display is restored by pressing a key

on the keyboard, or clicking the mouse.

USING THE RIGHT POWER CORD

The accessory power cord for the Northern American region is the wallet plug with NEMA 5-15 style and is UL

listed and CSA labeled. The voltage rating for the power cord shall be 125 volt AC.

Supplied with units intended for connection to power outlet of personal computer: Please use a cord set

consisting of a minimum No. 18 AWG, type SJT or SVT three conductors flexible cord. One end terminates with a

grounding type attachment plug, rated 10A, 250V,CEE-22 male configuration. The other end terminates with a

molded-on type connector body, rated 10A, 250V, having standard CEE-22 female configuration.

Please note that power supply card needs to use VDE 0602, 0625, 0821 approval power cord in European

counties.

Содержание X191W




























































Результаты поиска

Содержание X191W

Отзывы:

Похожие инструкции для X191W

Бренды по названию

Популярные бренды

Acer X191W, Руководство по обслуживанию

Результаты поиска

Содержание X191W

Отзывы:

Похожие инструкции для X191W

Бренды по названию

Популярные бренды