background image

Changes may be made periodically to the information in this publication without obligation 

to notify any person of such revisions or changes. Such changes will be incorporated in new 

editions of this manual or supplementary documents and publications. This company makes 

no representations or warranties, either expressed or implied, with respect to the contents 

hereof and specifically disclaims the implied warranties of merchantability or fitness for a 

particular purpose.

Record the model number, serial number, purchase date and place of purchase information in 

the space provided below. The serial number and model number are recorded on the label 

affixed to your projector. All correspondence concerning your unit should include the serial 

number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in 

any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, 

without the prior written permission of Acer Incorporated.

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Copyright © 2013. Acer Incorporated.

All Rights Reserved.

Acer Projector X1263/X1263N/P1163/X1163/X1163N/X113 Series User's Guide

Original Issue: 01/2013

Acer Projector X1263/X1263N/P1163/X1163/X1163N/X113 Series

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product 

names or trademarks are used herein for identification purposes only and belong to their respective 

companies.

"HDMI™, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered 

trademarks of HDMI Licensing LLC."

Содержание X1263N Series


























































Отзывы: